6 INCH LIFT KIT FORD F-150 2WD (2021-2023)
6 INCH LIFT KIT FORD F-150 2WD (2021-2023)
SKU:40630
Share
OVERVIEW
Improved Ground Clearance and Ride Quality. Give your Fourteenth generation Ford F-150 an aggressive new look and unparalleled off-road performance with Rough Country's 6-inch Suspension Lift. This all-inclusive kit features everything needed to take your Ford off the freeway and into the fields.
Durable Design and Function! Rough Country’s 6in Suspension Lift gives you plenty of increased ground clearance for off-road action and enough additional ride height to run up to 35in tires for a head-turning look that’s sure to command attention. Each kit features a set of high-quality front and rear cross members with a laser-cut RC logo, giving the truck a fierce, but streamlined look after lifting. Featuring a set of durable lifted knuckles and strut spacers, you'll gain enough ride height to run up to 35-inch tires with proper wheel spacing! Our Fabricated Rear Blocks offer considerably more strength than their cast iron counterparts and were specifically engineered by Rough Country to prevent against axle-wrap.
Installation. Featuring a 100% bolt-on installation process, an estimated timeframe of 7-8 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly!
Limited Lifetime Replacement Warranty. Rough Country's 6-inch Suspension Lift is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
FEATURES
- Increased ground clearance
- Track width remains the same as factory
- Works with 20in or larger factory wheels*
- Levels the front with the rear of the vehicle
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
NOTES - IMPORTANT
- Does NOT fit Single Cab models.
- Fits models with two-piece driveshaft.
- Does NOT fit diesel models.
- Does NOT fit Tremor models.
- Does NOT models equipped with CCD system.
- Wheels must be 20" in diameter or larger.
IN THE BOX
- Lifted Knuckles
- Strut Spacers
- Front Crossmember
- Rear Crossmember
- Sway-Bar Drop Brackets
- Brake Line Brackets
- Hardware
- Fabricated Anti-Wrap Lift Blocks
- Brake Line Relocation Brackets
- U-bolts
- Hardware
- (2) Premium N3 Shocks
INSTRUCTIONS
- Est. Install Time: 7 - 8 hours
- View Instruction Sheet
VEHICLE FITMENT
ALWAYS read all product page details for more important fitment information
RECOMMENDED TIRES & WHEELS
TIRE WHEEL BOLT PATTERN OFFSET NOTE
35x12.50R20 20x9 6x135 -12 -
35x11.50R20 20x9 6x135 -12 -
295/65R20 20x9 6x135 -12 -
295/60R20 20x9 6x135 -12 -
35x12.50R20 20x9 6x135 +0 -
295/60R20 20x9 6x135 +0 -
35x12.50R20 20x9 6x135 +1 -
295/60R20 20x9 6x135 +1 -
35x12.50R20 20x10 6x135 -25 Minor Trimming
295/60R20 20x10 6x135 -25 Minor Trimming
35x12.50R20 20x10 6x135 -19 Minor Trimming
295/60R20 20x10 6x135 -19 Minor Trimming
35x12.50R20 20x10 6x135 -18 Minor Trimming
295/60R20 20x10 6x135 -18 Minor Trimming
35x12.50R20 20x12 6x135 -44 Trimming Required
35x12.50R22 22x10 6x135 -25 Minor Trimming
35x12.50R22 22x10 6x135 -19 Minor Trimming
285/55R22 22x10 6x135 -19 -
35x12.50R22 22x10 6x135 -18 Minor Trimming
285/55R22 22x10 6x135 -18 -
35x12.50R22 22x12 6x135 -44 Trimming Required
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation