Skip to product information
1 of 1

READY LIFT

2.0" FRONT LEVELING - FORD F-150, MARK LT 2004-2014

2.0" FRONT LEVELING - FORD F-150, MARK LT 2004-2014

Regular price $229.95 USD
Regular price Sale price $229.95 USD
Sale Sold out

SKU:66-2059

QUICK OVERVIEW

2004-2014 Ford F150 leveling kit. Max Lift 2.0" - Max Tire Diameter 35"-4WD / 33"-2WD

 

ReadyLIFT leveling kits are the fastest, safest, least expensive way to bring the front of an F-150 level with the rear. Our innovative Smart Suspension Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLIFT steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed! The 66-2059 strut extension provides 2" of lift which gives clearance to add up to 33" wheels and tires onto 2004-2014 2WD F-150 trucks, and 35" tires on 2004-2014 4WD F-150 trucks. Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLIFT can be installed on a few hours and costs less than the price of a single custom wheel. All ReadyLIFT products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, and detailed installation instructions.

 

 

TIRE FITMENT

35" Maximum tire diameter

35x11.50 for no rub on a 9" wide wheel with +12 offset

18" - 285/75R18

20" - 295/65R20

22" - 285/55R22

Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

 

KIT COMPONENTS

-Two steel leveling strut extensions with hardware and instructions.

 

 

 




 

 

 

INSTALLATION

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

 

INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

 

INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

 

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.


DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.


Estimated Installation Time: 3.5 Hours +/- 0.5 hours
(excluding alignment and wheel/tire assembly)

 

HAVE A CERTIFIED MECHANIC DO IT FOR YOU!

View full details